Troubleshooting - Reely YAK 54 Bedienungsanleitung



16. Troubleshooting

Even though the model and the remote control system are state-of-the-art products, there can still be malfunctions or faults. For this reason, we would like to give
you some information on how to deal with possible problems.
Problem
The transmitter does not respond.
The transmitter goes off straight away or after
a short while.
The range of the system is very short.
The model does not respond.
The engine does not start.
42
Remedy
• Check batteries in the transmitter.
• Check polarity of the batteries.
• Check the power switch.
• Check the labelling on the crystals.
• Change the crystals to a different channel.
• Check or replace batteries in the transmitter.
• Fully extend the transmitter aerial.
• Check batteries in the transmitter and the model.
• Check receiver aerial for damage and electrical continuity.
• Check flight battery or connector in the model.
• Check connections on the receiver.
• Check the labelling on the crystals.
• Change the crystals to a different channel.
• Move the motor speed control stick and the corresponding trim slider to the lowest position (motor-off
position). When you reconnect the flight battery to the speed controller and then push the control stick
towards maximum motor speed, the motor should start running.
• Check the flight battery.
• Check motor and speed controller.