Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

b) Switching on the transmitter
Slide the on/off switch (see also Figure 1, no. 8) from the
left position (off) to the right position (on).
The transmitter emits a short beep and the LED indicator
(see also Figure 1, no. 15) starts to flash.
Then, push the joystick for the pitch and yaw function (see
also Figure 1, no. 12) all the way up. The transmitter emits
a short beep.
Now, move the joystick all the way down. The transmitter
emits another beep and the LED indicator lights up con-
tinuously.
Then, switch off the transmitter again using the on/off
switch.
If the power supply is no longer sufficient for correct operation of the transmitter, the indicator LED (see
Figure 3, no. 15) flashes on and off every 3 seconds. The transmitter emits a short beep with the same
rhythm.
In that case, stop flying the quadrocopter immediately and insert a set of new batteries into the transmitter.
52
Figure 3

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis