Switching On The Transmitter - Reely Sky Roller Bedienungsanleitung

b) Switching on the Transmitter
Move the control stick for the pitch and yaw functions
(also see figure 1, item 8) to the bottom position right
at your body.
Slide the on/off switch (also see figure 1, item 7) from
the left position „OFF" to the right position „ON".
The transmitter emits a signal sound and the LED dis-
play (also see figure 1, item 2) flashes in a dual rhythm
with a brief pause.
Slide the control stick for the pitch and yaw functions
all the way up and then all the way down again. The
transmitter then emits another signal sound and the
LED display is now lit permanently.
Then switch off the transmitter again with the on-off
switch.
If the power supply is no longer sufficient for a proper operation of the transmitter (less than approx. 2.1 V),
the LED display flashes and the remote control emits short alarms at regular intervals (approx. every 10
seconds).
In this case, terminate flight operation of the model immediately and insert a new set of batteries in the
transmitter.
Figure 3
37