Maintenance And Cleaning - Reely Small Pepper Drone Bedienungsanleitung

17. Maintenance and cleaning

Clean the exterior of the model and the remote control with a soft, dry cloth or brush only. Never use abrasive cleaning
agents or chemical solutions, as these may damage the surface of the housing.
The propellers must move smoothly and motor shafts should not be bent or have any play in the bearing. Propellers
that are cracked or bent or from which small pieces have broken off must always be replaced.
Changing the propellers
The propellers (1) are only pushed onto the motor shafts
(2) of the drive motors and can be removed carefully up-
wards from the shafts.
When removing the propellers, ensure not to bend the mo-
tor shafts.
When selecting the new propeller, always note the direc-
tion of rotation. The propellers are labelled with the letter A
or B as appropriate (see also Figure 5).
The new propeller should be positioned on the motor shaft
straight, from above and pushed carefully down as far as
it will go.
Important!
Do not use any unnecessary force or unsuitable tools.
When replacing mechanical parts, use only original spares available from the manufacturer.
The spare parts list can be found in the downloads section of our website (www.conrad.com).
You can also order the spare parts list by calling our customer service hotline. For contact details, please refer to the
"Introduction" section at the beginning of these instructions.
Figure 27
77