Flip Function - Reely Small Pepper Drone Bedienungsanleitung

12. Flip function

The quadrocopter is also designed to fly roll-overs (flips) if desired. You should fly the first flips outside when there is
absolutely no wind. To do this, let the quadrocopter ascend to a safe altitude of approx. 2 m and then hover in position.
To switch the transmitter to flip mode, briefly press the
push button for the flip function (see also Figure 1, no. 2).
To indicate that the transmitter has switched to flip mode, it
emits short beeps continuously.
Now move the joystick for the bob and roll function quickly
as far as it will go in the direction in which the quadrocopter
should flip and immediately bring the joystick back to the
centre position.
The quadrocopter executes the roll-over in the desired di-
rection. The transmitter then deactivates flip mode.
To be able to fly another roll-over, press the push button for
the flip function again.
If the battery voltage is too low (LED on the
quadrocopter flashes), the flip function is not
possible.
Figure 16
65