Troubleshooting; To Solve Problems; How To Diagnose By Symptom - FP FPi 2500 Betriebsanleitung

Troubleshooting

To solve problems:

1. Write down the error number. When you press the [ i ] button in the screen with the
error message, an error number is displayed.
2. Consult the
3. Switch the system off and on again to verify system operation.
4. When the error still occurs contact your service organization.
8

How to diagnose by symptom

Startup Problems
Symptom
The system cannot
be started.
The display does not
start up.
62
When you contact the service organization, you will be asked for
the last error message.
troubleshooting table to solve the problem
Possible cause
System not connec-
ted to the power sup-
ply.
You switched off the
system accidentally.
A cover is opened.
System not connec-
ted to the power sup-
ply.
You switched off the
system accidentally.
on page 62.
Remedy
Connect the system
to the power supply.
Switch the system on.
Close the covers.
Connect the system
to the mains the
power supply.
Switch the system on.
Reference
-
-
-
-
-