Change Fold Type - FP FPi 2500 Betriebsanleitung

Change Fold Type

In most cases, the system chooses the fold type automatically. If you want to use a different
fold type or change the location of the fold position, proceed as follows:
3
1.
Press the Fold Type
After a testrun, at the fold type icon an
2.
When you press the
The fold length screen allows you to define specific fold length settings. Or
select Automatic to let the system determine the fold length.
3. Press the [OK] button to confirm.
26
icon to select a fold type.
(arrow) is visible.
, the Fold Length screen is displayed.