FP FPi 2500 Betriebsanleitung Seite 16

The following is a list of icons and their descriptions.
1. Home / Settings menu
2. Daily mail
Turns daily mail on/off.
3. Main Document feeder
Sets the number of docu-
ments to be fed from the
main document feeder.
4. Enclosure document
feeder
Sets the number of docu-
ments to be fed from the en-
closure feeder.
5. Batch counter
Sets the number of sets that
must be processed for each
batch.
6. Sealing
Turns sealing on/off. When
sealing is off, the flap of the
nevlope is closed but not
moistened.
7. Reading
Turns reading on/off (BCR or
OMR).
8. 1x
Starts a test run.
9. Save
Saves the current job. You
can save a job after one set
is created.
10. Recycle bin
Deletes the current job.
11. Feeder Linking
Turns linking on/off. Linking
means that when one feeder
is empty, the system automat-
ically starts feeding docu-
ments from the other feeder.
A symbol at the feeders
shows if the feeders are
linked or not.
12. Address Position
Sets the address position. If
the address is not fully visible
through the envelope win-
dow, use this button to adjust
the position.
13. Fold type
Sets the fold type. Which fold
types are available depends
on the documents and envel-
opes in the system.
14. BRE
Turns BRE feeder on/off.
15. Envelope hopper
Turns envelopes on/off. For
fold only mode, set the envel-
opes to No.
Information
2
11