Omr Code - FP FPi 2500 Betriebsanleitung

OMR Code

The following is the correct position of the OMR code on a document.
Minimum line thickness of a mark: 0.2 mm (0.008'')
Default the first mark from the top is set to: 100 mm (3.9'').
This parameter is set in the [Service Settings menu], [Reading], [Optical Mark
Reading]. The code must have a consistent number of marks on every page.
OMR License Types
There are two OMR license types:
• Basic
• Advanced
The white area in the picture shows the limits where the code can
be printed.
6
43