General; Installation And Connection; Summary; Housing Size D - E - KEB COMBIVERT F5 - Serie Betriebsanleitung

General

1. General
GB
GB
2.

Installation and Connection

2.1

Summary

2.1.1 Housing Size D - E

GB- 4
The digital servo controller KEB COMBIVERT F5-SERVO serves
exclusively for the control and regulation of the servo motors KEB
COMBIVERT SM.
On delivery the servo amplifiers are synchronized to the servo motors
supplied by KEB. So you receive a highly dynamic drive which is
connected and ready for operation within the shortest time for standard
applications.
The operation of other motors requires an adaption of the amplifier and
is to be recommended only with special knowledge of control technology.
KEB COMBIVERT F5-SERVO has very extensive programming options.
To make the operation and start-up simpler for the user, a special
operator level was created in which the most important parameters are
found. However, if the parameters pre-defined by KEB are not sufficient
for your application an application manual is available.
observe the ma-
ximal width of
connectors for
X3A and X3B.
X2A
Connection
Control Terminal
X3B
9-pole Sub-D Socket
OPTION
X3A
15-pole Sub-D Socket
Connection Incremental Encoder
Optional Operator
with 9-pole Sub-D Socket
Parameter Interface