Configuring The System; Changing Hotkeys Or Double Hotkeys - Guntermann & Drunck DVIMUX8-OSD-PS/2 Installationsanleitung

Configuring the system

Only the Supervisor or (apart from resetting the default configuration) users with con-
figuration rights can view and edit the system settings of the KVM switch.
The following settings are active in the default setting of the KVM switch:

Changing hotkeys or double hotkeys

NOTE: The single hotkey
If you want to use a key combination consisting of two hotkeys, you can enable the
usage of double hotkeys (see page 41).
Press the hotkey and
can access a computer by pressing the hotkey and one of the select keys (see
page 12).
If an application program or another G&D device uses the same double hotkey
within the cascade, you can change the hotkey in the settings of the KVM switch.
NOTE: In addition to using the defined hotkey or double hotkey, you can open the
on-screen display by pressing the
How to change current hotkeys or double hotkeys:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the menu.
3. Use the
Arrow keys
4. Use the
Arrow keys
options.
SYSTEM CONFIG
Hotkey:
Double Hotkey:
OSD via 2x Keypress:
Select Keys:
Cascade Setup
USB Keyboard Mode
Video Config
PS/2 Keyboard Type
Set System Defaults
Esc Enter
is preset at default.
Ctrl
Num to open the On-Screen Display of the KVM switch. You
or the
Ctrl
to select
System Config,
to select , and press
Hotkey
DVIMUX8
Ctrl
No
No
0..9
...
...
...
...
...
F1:Save
key twice (see page 42).
Print Screen
and press .
Enter
to select one of the following
Space
G&D DVIMUX8-OSD-PS/2 · 40
Configuration