Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User or Supervisor login/logout
Login as user or Supervisor
IMPORTANT:
Access to the KVM switch is not password-protected (OpenAccess) in
the default configuration. The login window is not displayed after the device is
turned on. The
Select Computer
Log off the active user to open the login box (see below).
The KVM switch asks you to log in after the user module is turned on or another
user logs out
How to log in as user or Supervisor at the KVM switch:
1. Enter the following data into the login box:
Name:
Enter your username.
Password:
Enter the password for your user account.
NOTE:
In the default configuration, the
password
4658
. Change this password after the first login (see page 25).
ADVICE:
In the default configuration, accessing the KVM switch does not
require you to enter a username or a password (OpenAccess).
2. Press
to log in and to open the On-Screen Display.
Enter
NOTE:
A computer is automatically accessed if the access is defined in the user
account (see page 28).
menu opens directly.
LOGIN
Please enter your login:
Name:
Password:
Esc
DVIMUX8
Enter
account is assigned with the
SUPERVISOR
G&D DVIMUX8-OSD-PS/2 · 22
User management
Werbung
Kapitel
Inhaltsverzeichnis
