Positioning Information Displays - Guntermann & Drunck DVIMUX8-OSD-PS/2 Installationsanleitung

Configuration
4. Use the
Arrow keys
of the following options:
Temp: Temporary information display (5 seconds)
Perm: Permanent information display
Off: Disable information display
5. Press F1 to save your settings.

Positioning information displays

In the default configuration, the information display is shown at the left upper cor-
ner of the console monitor. However, you can adjust the position to your needs.
How to move information displays:
1. Press Ctrl+Num
2. Press F1 to open the menu.
3. Use the Arrow keys
4. Use the Arrow keys
5. This message is shown at the current position of the
information display.
6. Press the Arrow keys
7. Press Enter or the left mouse key.
8. Press F1 to save your settings.
35 · G&D DVIMUX8-OSD-PS/2
to select
Show Display
(standard) to open the On-Screen Display.
to select Console Setup
to select Display Position
or the mouse to move the menu to the desired position.
and press (repeatedly) to select one
Space
and press Enter .
and press Enter .
+
Display position