Changing The Mode Of »Cpu« Interfaces - Guntermann & Drunck DVIMUX8-OSD-PS/2 Installationsanleitung

Configuration
Changing the mode of »CPU« interfaces
In the default configuration, the KVM switch is configured to connect computers to
the CPU interfaces.
If you want to connect a slave switch to one of the CPU interfaces, change the mode of
the interface accordingly. Now the master switch can access any computer that is
connected to the slave switch.
You can find detailed information about this topic in the paragraph Increasing the
number of connectable computers on page 48 ff..
43 · G&D DVIMUX8-OSD-PS/2