Configuring The «Global» Network Settings - Guntermann & Drunck DVICenter DP32 Installationsanleitung

Initial configuration of network settings « Central Module
Netmask:
Connection type:
7. Press to save your settings.
F2
Configuring the «global» network settings
In complex networks, the global network settings ensure that the matrix switch is
available from all sub networks.
How to configure the global network settings:
1. Press Ctrl+Num
2. Press F11 to call the Configuration menu.
3. Select the Network
4. Select the
Settings
5. Enter the following data in the
Global prefer- Select the operating mode by pressing
ences
 Static:
 DHCP:
Hostname: Enter the matrix switch hostname.
Domain: Enter the domain the matrix switch is to belong to.
Gateway: Enter the gateway IP address.
DNS Server 1: Enter the DNS server IP address.
DNS Server 2:
Enter the IP address of another DNS server (option).
6. Press F2 to save your settings.
11 · G&D DVICenter DP32
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Press F8 to define if the network port and its communication
partner are to negotiate the connection type automatically
( Auto ) or select one of the listed types.
(default) to open the on-screen display of the KVM matrix system.
entry and press
entry and press
Main Network
uses static settings.
auto obtains the settings described below from a
DHCP server.
Enter .
.
Enter
paragraph:
:
F8