Installation instructions, only for experts
Setting ranges:
Sauna mode:
Clima mode:
Evaporator:
Fan:
Pre-set time:
Max. pre-set time:
max. adjustable heating duration:
* EN 60335-2-53 specifies a heating time limitation of 6 h for private saunas. For saunas
in hotels, apartment blocks and similar locations, a maximum heating period limit of
12 hours is permissible. Extending the heating period limit to 18 hours or 24 hours is
only permitted in public saunas.
Connected cables:
Power supply cable:
Heater supply cable (temperature-resistant up to 150 °C):
Sensor wires (temperature-resistant up to 150 °C):
Light wire:
Fan wire:
Maximum cable lengths:
Heater sensor F 1:
Bench sensor F 2 / FTS2:
Auxiliary power units:
S2-18:
S2-30:
WORLD OF WELLNESS
10 - 110 °C at bench sensor FII/FTS2
10 - 80 °C at bench
10 - 80% relative humidity
00 - 100% fan power
in 1 minute increments
23 hours 59 minutes
6 hours*
10 m
10 m
Increase of the switched power of 10.5 kW to
18 kW total power;
Increase of the switched power
from 10.5 kW to 30 kW total power.
p. 43/44
min. 5 x 2.5 mm²
min. 2.5 mm²
min 0.5 mm²
min. 1.5 mm²
min. 1.5 mm²
EN