Climate Mode: Manual Operation - Quick Start - Sentiotec Ck 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user
9. Activating automatic mode
In addition to Chapter "After automatic mode", there is another way to activate
automatic mode with the set values.
● Press the SAUNA
Press the CLIMA
The indicator light AUTOMATIC

8.8. Climate mode: Manual operation - quick start

1. Switching on the sauna control unit
● Press ON/OFF switch
The indicator lights
The indicator light of the last selected bath type SAUNA
goes on.
In the display
6
2. Setting climate mode
● Press clima button
The indicator light of the clima button
the sauna button
The indicator lights
The current time then appears in the display
● Press the START/STOP
Heating is started immediately with the pre-programmed temperature value
of 50 °C, or the last set temperature; the heating process begins immediately.
WORLD OF WELLNESS
button for sauna mode or
h
button for clima mode and hold for 3 seconds.
a
5
.
1
- go on for approximately 5 seconds.
c f
the current time appears (e.g. 16:30): 16:30
.
a
goes off.
h
- go on for approximately 5 seconds.
c f
.
7
goes on.
goes on and the indicator light of
a
.
6
p. 31/44
or CLIMA
h a
EN