Automatic Cabin Night-Drying Program; For Longer Breaks In Operation; Pre-Settings - Sentiotec Ck 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user

8.11. Automatic cabin night-drying program

The cabin night-drying program starts automatically after the clima operation
ends, drying the cabin:
Note
It is recommended for night drying that you observe the corresponding
operating instructions of the cabin manufacturer. In general, the night-
drying program should not be ended prematurely, as this can lead to
damage to the cabin (e.g. mould and rot).
After the clima operation ends, the night-drying program starts automatically.
The night-drying phase can last up to 85 minutes. The cabin temperature is
regulated and the fans run at different speeds. After the drying program ends,
the display switches to standby.
6

8.12. For longer breaks in operation

Turn the ON/OFF switch

8.13. Pre-settings

You will receive your control unit with factory pre-sets. The corresponding values
of the functions can be found in the following table:
Sauna mode:
Start of heating
Heating duration
Temperature
Fan
Clima mode:
Start of heating
Heating duration
Temperature
Fan
Clima
WORLD OF WELLNESS
of the control unit off.
1
OFF no setting
6 hours
90 °C
60 P
OFF no setting
6 hours
50 °C
60 P
50 H
p. 37/44
EN