Sentiotec CK 31 Montage- Und Gebrauchsanweisung Seite 73

Instructions for use for the user
● Using the UP/DOWN buttons
In the display
6
● Press the PROG/OK
In the display
6
The fan speed has been set.
7. Viewing/changing settings
During sauna operation, you can view or change all temperature, heating dura-
tion or fan settings.
a) Viewing/changing target values
● Press the PROG/OK
set value flashes.
● Using the UP/DOWN buttons
● Press the PROG/OK
b) Manually turning the program off
● During heating:
Press the START/STOP
– Sauna heating turns off.
– The indicator light HEATING
– The control unit is in standby mode
WORLD OF WELLNESS
, set the desired value, e.g. [50%]:
8
flashes: 50 P
button:
9
the set fan output appears: 50 P
button: In the display
9
, enter the desired value or view the set value:
8
button: The new setting has been made.
9
:
7
4
the corresponding current
6
goes out.
.
p. 29/44
EN