Product Description; Scope Of Delivery; Optional Accessories; Product Functions - Sentiotec Ck 31 Montage- Und Gebrauchsanweisung

Instructions for installation and use

3. Product description

3.1. Scope of delivery

● Sauna control unit
● Heater sensor with integrated excess temperature fuse (F1)
● Sensor wires
● Installation material

3.2. Optional accessories

● Bench sensor (item number: O-F2)
● Humidity temperature sensor (item number: O-FTS2)
● Power booster (item number: O-S2-18 / O-S2-30)
● Safety shut-off (item number: HT-SWL)
NOTE – optional accessories:
The F2 sensor, or alternatively the FTS 2 humidity temperature sen-
sor, must be ordered separately, otherwise the sauna control unit is not
operational.

3.3. Product functions

The CK 31 sauna control unit features the following functions:
● Regulation of combi sauna heaters with a heating output of up to 10.5 kW
and an evaporation output of up to 3.5 kW.
● A power booster allows the maximum contact rating to be increased from
10.5 kW to 18 kW or 30 kW.
● Intensity regulation of a fan (up to 100 W).
● Pre-set time function (up to 23 hours 59 minutes)
● Automatic heating period limiter
The sauna control unit shuts down automatically after the maximum heating
period for safety reasons. The maximum heating period can be set to 6 h,
12 h, 18 h or 24 h.
WORLD OF WELLNESS
p. 8/44