Selecting Menu Items - Sentiotec Ck 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user
The settings can be changed when using the sauna and clima modes. Sauna
operation is automatically stopped after a specified heating duration. In clima
mode, a drying program (DRY) is performed after the heating duration.
Note: What is the target value or the actual value?
Target value = is the value that you set and would like to have.
e.g. 90 °C
Actual = is the current value in the cabin.
e.g. 85 °C

8.4. Selecting menu items

Using the Up/Down
menu items.
If you have selected a menu function, press the PROG button
now starts to flash. When flashing, you can use the UP/DOWN
change the value. Once you have set the desired value, press the PROG/OK
button again. The value is applied and the display
9
ing the UP/DOWN
value to start to change rapidly.
Using the START/STOP button
again later.
Tip rapid change for input values!
After holding the UP/DOWN buttons
the input values start to change rapidly.
WORLD OF WELLNESS
button, you can move up and down through the various
8
buttons down when the display is flashing will cause the
8
7
, you can start direct operation and stop it
for approximately 5 seconds,
8
p. 22/44
. The display
9
buttons to
8
stops flashing. Hold-
6
6