Operation; Switching On The Light; Switching On The Sauna Control Unit - Sentiotec Ck 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user
Menu item 2 - Options (message relay REL/REL)
Submenu: 0 - 0 = message relay deactivated (0)
1 = Collective error (ErrX)
2 = AC operation (relay "On")
3 = AC operation + drying (relay "On")
4 = Drying (relay "On")
5 = Sauna operation (relay "On")
6 = Target temperature reached (relay "On")
8 = Collective error (ErrX or "Fill")
To change a setting, press the PROG/OK button
flashes in the display. Use the "UP" or "DOWN" button to select the desired
value. To confirm the selection, press the PROG/OK button
the controller using the ON/OFF switch

8. Operation

Note Fig. 8 in the figures chapter.

8.1. Switching on the light

The light in the sauna room can be switched on and off independently of the
ON/OFF switch
1
To switch the light on or off on the power unit, press the light switch

8.2. Switching on the sauna control unit

WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
WORLD OF WELLNESS
.
. The last set value now
9
.
1
p. 20/44
. Then turn off
9
.
2