Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting and Activating/Deactivating Rain Volume
• Touch the display area „RAIN" repeatedly until the ,rain volume and the display „HI AL" flashes.
• Select the rain volume with the buttons „+" and „-". Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF" to switch the alarm function on or off.
With the alarm function on, the icon „
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location.
To get to the next subfunction (displaying/resetting the maximum value storage for rain volume) -> touch
the display area „RAIN" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Displaying/Resetting Maximum Value Storage for Rain Volume
• Touch the display area „RAIN" repeatedly until the maximum rain volume and the display „MAX" (to the left of the
weather symbols) flash.
• To reset the maximum value, keep the display area „RAIN" pushed for 3 seconds.
To get to the next subfunction (displaying/resetting the total) -> touch the display area „RAIN" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Displaying/Resetting Total
• Touch the display area „RAIN" repeatedly until the total rain volume and the display „TOTAL" flash; the text message
„CLEAR" will also flash at the bottom in the date area.
• To reset the total value , keep the display area „RAIN" pushed for 3 seconds. Then the total volume and all other
stored values for the rain volume are reset.
To get back to the first subfunction (displaying rain volume) -> touch the display area „RAIN" briefly 2x
Leaving setting mode -> touch the button „RAIN" briefly 1x (or touch another display area wait for 30
seconds without touching the touch screen)
" appears below the display „HI AL". When the threshold value set is
73
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
