C) Display Area „Wind" (Wind Speed/Direction); Switching Display Between Average Wind Speed And Gust Speed; Selecting Wind Speed Unit (Km/H, Mph, M/S, Knots, Bft) - Conrad 672861 Bedienungsanleitung

c) Display Area „WIND" (wind speed/direction)
The following setting and subfunctions are available:

• Switching Display Between Average Wind Speed and Gust Speed

• Selecting Wind Speed Unit (km/h, mph, m/s, knots, bft)

• Setting and Activating/Deactivating Wind Speed Alarm
• Setting and Activating/Deactivating Wind Direction Alarm
• Displaying/Resetting Maximum Value Storage for Wind Speed

Touch the display area „WIND" briefly repeatedly until the desired subfunction flashes.
 Switching Display Between Average Wind Speed and Gust Speed
• Touch the display area „WIND" repeatedly until the wind speed flashes.
• Select the desired display mode with the buttons „+" and „-".
You may switch between displaying the average wind speed and displaying the gust speed („GUST" is displayed
additionally then).

To get to the next subfunction (selecting the wind speed unit) -> touch the display area „WIND" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Selecting Wind Speed Unit (km/h, mph, m/s, knots, bft)
• Touch the display area „WIND" repeatedly until the wind speed flashes and the corresponding unit (e.g. „km/h")
flashes.
• Select the desired unit with the buttons „+" and „-".
km/h = kilometres per hour
mph = miles per hour
m/s = metres per second
knots = knots
bft = Beaufort

To get to the next subfunction (setting and activating/deactivating the wind speed alarm) -> touch the
display area „WIND" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
70