Inhaltsverzeichnis
Werbung
FRONT FORK
26. Install:
Cap bolt 1
G
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
27. Install:
Protector guide 1
G
Installation
1. Install:
Front fork 1
G
NOTE:
Temporarily tighten the pinch bolts (under
G
bracket).
Do not tighten the pinch bolts (handle crown)
G
yet.
2. Tighten:
Cap bolt 1
G
3. Adjust:
Front fork top end a
G
Front fork top end (standard) a:
Zero mm (Zero in)
4. Tighten:
Pinch bolt (handle crown) 1
G
Pinch bolt (under bracket) 2
G
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5 - 37
CHAS
30 Nm (3.0 m · kg, 22 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
Werbung
Inhaltsverzeichnis
