38/39 Z Adding The Detergent; Z Starting The Programme; Z Programme Time/Programme Status; Z Changing The Programme Before Starting - Schulthess Fust NOVAMATIC WA 7097 Bedienungsanleitung

X While loading the machine, the laundry is weighed.
Reduce the detergent quantity in case of a low laundry
weight following the display recommendations to 2/3 or
1/2 of the manufacturer's data.
For a laundry weight below 50%, the wash time will be
reduced.
Adding the detergent
Dose the detergent according to the chapter «Detergent
drawer»
Close the detergent drawer carefully after dosing until
you feel it look.
X Risk of water damage!
Starting the programme
X Lightly press the Start button.
 The pilot lamp illuminates and the programme runs
through automatically.
With child lock activated:
X Hold down the Quick Wash button and actuate the
Start button.
Programme time / programme status
The individual programme steps and remaining time are
displayed during the washing programme.
Changing the programme before starting
X Lightly press the desired programme button once
again.
 Select additional programmes.
X Select any additional functions that may be needed.
X The weight which has already been weighed will be
deleted. There will not be a new weight display.
Cancelling the programme
Cancel the programme by repeatedly pressing the quick
wash button until «Open door» is displayed.
With child lock activated:
X Hold down the start button while selecting a new
programme.
When restarting the programme:
X Repeat the detergent addition.
39
Ending the programme with rinsing stop
You have selected the additional rinsing stop function.
The laundry will be held in the last rinse water.
The display will show «Rinsing stop».
You have two options for ending the programme:
The laundry can be spun
X If the spin speed was not changed when the pro-
gramme was selected, this can be done using the
selection button «Spin speed / Rinsing stop».
X Press the Start button.
 The water will be pumped out and the laundry spun.
The laundry can be removed dripping wet
X Press the Quick Wash button twice.
 The rinse water is pumped out.
X By pressing the «Quick wash» button, the spin can be
ended early to be kind to your laundry (e.g. curtains).
With child lock activated:
X Hold the Start button down at the same time.
Programme end
The programme end is shown by the time 00:00h and
the words «Open door».
Tumbling the washing
The tumbling phase at the end of the programme lasts
5 minutes (excluding especially gentle wash programmes
such as wool, e.g.) and prevents creasing the laundry.
Removing the laundry
 During the loosening up phase:
(Drum is still turning / Time indicator 00:00h)
X Press the quick wash button once.
(Halt programme)
X Press the door open button and
X remove the laundry.
 At the end of the loosening-up phase:
X Press the door opening button and
X remove the laundry.
Remove any foreign objects (e.g. paperclips) from the
drum and rubber seal!
Otherwise there is a risk of rust!
Leave the loading door ajar to allow the machine dry
out.