Screen Calibration; Units; Usb Function Details - Carson Reflex Stick Ultimate Touch Betriebsanleitung

1.53 Screen calibration

You can use a pen to touch the cross center point to
calibrate After calibrating, it will exit or press return
button to exit.

1.54 Units

Select length and the temperature unit.
Length:
Metric uses millimeter, kilometer and kilometer per
hour.
Imperial uses inch, mile and mile per hour
Temperature:
Celsius and Fahrenheit degree for your option.

1.55 USB function details

None: the USB interface can be used only to charge
the battery of the transmitter.
FS-i10: when connected to a computer, the transmit-
ter acts as a standard HID with 4 axes (one for each
channel) and 10 buttons (1-10) and can be used as
the main controller in any compatible simulation
software.
1. Connect the transmitter to the computer by the
Micro USB cable.
2. Switch on the transmitter, then touch system -----
USB function ----- FS-|10 simulator.
After that, the computer will automatic identify the
HID.
3. ln the computer control panel, double click Game
controller ----- FS-|10 emulator to test whether the
simulating function is ok.
CARSON Reflex Stick Ultimate Touch 500501002
Pic. 21.68
Pic. 21.69
Pic. 21.70
GB
117