Gyroscope; Alarm Function Description; Led Indicator Alarm - Carson Reflex Stick Ultimate Touch Betriebsanleitung

3.9 Gyroscope

This function is used for adjusting the gyro sensiti-
vity in current conditions. The higher the sensitivity
is, the more correction the gyro provides and the
"softer" or less responsive the helicopter feels. The
default channel is CH5 and this function can be set
in 5 conditions respectively.
Move the wheel to modify the corresponding value.

4.0 Alarm function description

Audible alarm
1. When the transmitter battery is low and the
voltage is lower than 3.75V, the system will make
alarm which sounds slowly.
2. If the voltage is lower than setting data due to low
battery of receiver, the system will make a sound
„Ba, Ba".
3. When the error rate is more than 60%, the system
will make a sound „Du, Du".

4.1 LED indicator alarm

LED indicator alarm function synchronizes with
audible alarm function. It has no effect on LED
indicator after turning off the audible alarm.
Please check as folIows:
1. The LED remains on: all functions are normal
2. The LED flashes slowly: the transmitter battery is
low.
CARSON Reflex Stick Ultimate Touch 500501002
4. When the timer goes off, the system will make a
sound "Bi, Bi, Bi, Bi'" thrice.
5. Before the transmitter is turned off automatically,
the system will make a sound „Du Du Du".
6. When the transmitter's battery voltage is lower
than 3.7 V, the system will make alarm which
sounds quickly. When the voltage is lower
than 3.65 V, the transmitter will be turned off
automatically.
3. The LED flash is quickly:
- The battery of the transmitter is very low.
- Error rate is more than 60%.
- The battery of receive is low.
- The transmitter will turn itself off soon.
4. LED indicator is off: power off.
Pic. 23.09
129
GB