Herunterladen Inhalt Inhalt Diese Seite drucken

Channels Delay; Linear Mixes - Carson Reflex Stick Ultimate Touch Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1.25 Channels delay

GB
This function is to imitate some movements of real
aircraft like the flap Channels delay is used to slow
down the response speed of channel output. It can
be adjusted from 0 seconds to 10 seconds and the
default is O seconds. Select desired basic channel
and move the wheel to modify the delay time. The
position of the corresponding channel output is dis-
played in realtime. The red bar represents the stick
position and the green bar represents channel out-
put position.
As shown in picture 21.20: The delay time of CH2 is
set to 5 seconds. At this time, there will be a 5s delay
when moving the rudder stick from bottom side to
top side.

1.26 Linear mixes

This function could be helpful when you are flying some special
movements and need mix control function Linear Mixes can set 4
groups of mix controls among any two sticks, basic functions and output
channels. This function can be set in five conditions.
The slave channel will be affected by corresponding rate of master
channel, which will be changed in a linear fashion after linear mix function
is applied. Master channel contains stick/knob option and basic function
option or output channel option. Slave channel contains basic function
option or output channel option. But when output channel option is
selected in master channel function, there is only one output channel
option in slave channel options. The 4 mix functions can be assigned to
a switch.
Stick/knob: stick and knob from VrA to VrE.
Basic function: lt is the basic function for the aircraft movement. For
example: aileron function, rudder function, throttles function, and
elevator function and the throttle needle function for the aircraft
structure with the throttle needle, etc.
Output channel: CH1~Ch10;
Low side: Set how much the channel is affected by low side of master
channel.
High side: set how much the channel is affected by high side of master
channel.
Offset: set the deviation rate of the channel, based on the channel neutral
position.
102
CARSON Reflex Stick Ultimate Touch 500501002
Pic. 21.19
Pic. 21.20
Pic. 21.21

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

500501002

Inhaltsverzeichnis