Models - Carson Reflex Stick Ultimate Touch Betriebsanleitung

1.33 Models

GB
This function is used to set the model type, airplane/
glider/helicopter. It an save twenty different model
type parameters. It is changeable, copiable and re-
nameable. You can move model parameters to a SD
card and delete them from the SD card.
!
Only compatible with the SD card 2.0, whose
capacity is over 1GB
SD-Card not included.
Pic 21.35
Name: Modifies the name of the current model
Pic 21.36
Select the model configuration to load and use.
In this example, the first model is Selected. Simply
Touch another model menu item to load and use it.
Pic 21.37
Copies a model configuration to another. The target
configuration is lost and replaced by the source con-
figuration.
The first menu selects the source model configurati-
on to copy from.
How to operate:
1. Enter model function and press copy model to
select which one you need to copy
2. The screen will change to the model you copied.
3. After selecting one copied model, the window will
automatically open with a message asking if you are
sure to copy, YES or NO.
108 CARSON Reflex Stick Ultimate Touch 500501002
Pic. 21.34
Pic. 21.35 Pic. 21.36
Pic. 21.37