Faults And Trobleshooting; General Safety Instructions; Alarms And Errors - Salvis SousChef Originalbetriebsanleitung

en
6.

Faults and trobleshooting

6.1

General safety instructions

6.2

Alarms and errors

50 / 88
WARNING!
Live parts during troubleshooting
Electric shock
● Repairs may only be carried out by qualified profession­
als.
. Disconnect the device from the power supply before car­
rying out repairs (e.g. when changing components).
CAUTION!
Uncontrolled startup of the pump when the connection
is removed
Crushing
● Repairs may only be carried out by qualified profession­
als.
. Disconnect the device from the power supply before car­
rying out repairs.
CAUTION!
Critical temperature of device parts, water or acces­
sories
Burns, scalding
. Leave the device to cool down to room temperature!
. Disconnect the device from the power supply!
. Drain the water before transport!
● Repairs may only be carried out by qualified profession­
als!
Any alarms and errors triggered on the device are shown
as plain text on the display.
□ The components of the device, heater and pump, switch off. A
two-tone signal is output by the device. The red LED above
the fault triangle on the control head also lights.