Timer Functions - Salvis SousChef Originalbetriebsanleitung

en

Timer functions

Configuring timer
Fig. 12: Auto-Shut-Down
Fig. 13: Standby
46 / 88
□ If the timer is active, the current actual temperature on the
display is shown with a flashing decimal point.
□ If the timer is invoked using the corresponding menu item, the
remaining time, for example "05:30" is shown flashing.
□ If the timer is not active, "00:00" is shown flashing.
□ Once the time for Auto-Shut-Down has elapsed, the device is
not switched off completely but switched to standby. Standby
means all components of the device are switched off and only
the display of the device is still supplied with power.
1. Press the ENTER button.
You are in the menu of the device.
2. Press the DOWN arrow button.
The menu item for configuring the timer (ASD) is displayed.
3. Confirm with the ENTER button.
4. Use the arrow buttons to specify the time from which the
device should be switched to standby.
Wait for approx. 4 seconds if you would not like to apply the
specified value. The screen automatically returns to the default
display.
5. Confirm with the ENTER button.
The value must be confirmed within 4 seconds after the last
input. Otherwise the screen returns to the default display.
The device will be switched to standby after the time entered.
This is shown on the display as follows.