Conditioning the Water Filter
• Remove filter from the plastic bag and soak in a cup of water for 5 minutes.
• Rinse filter under cold running water.
• Wash the stainless steel mesh in the plastic filter compartment with cold water.
• Insert the filter into the filter holder.
• Set the dial date 2 months ahead.
• To install filter, push down to lock into place.
• Slide the water tank into position and lock into place.
1
2
Note:
Only use Gastroback filters 97765.
FIRST USE
Initial Start Up
• Fill tank with water
• Press POWER on
• A pumping sound will be heard. The machine will reach operating temperature and
go into Standby mode.
Flushing the Machine
It is recommended to complete a water flushing operation, without ground coffee, to
ensure the machine has been conditioned. When the machine has reached STANDBY
mode, run the following 2 steps.
• Press the 2 CUP button to run hot water through the group head for 30 seconds.
• Activate hot water for 10 seconds.
• Repeat this cycle until the water tank is empty.
3
4
NÄCHSTER WECHSEL
5
6
63