Pre-Programmed Shot Volume - 2 Cup; Programming Single Espresso; Programming Double Espresso; Resetting Default Volumes - Gastroback DESIGN ESPRESSO ADVANCED PLUS Bedienungsanleitung

PRE-PROGRAMMED SHOT VOLUME – 2 CUPS

PROGRAMMING SINGLE ESPRESSO

1. To begin programming, press the PROGRAM button once. The machine will beep
once and the program button will begin to flash. This indicates the machine is in pro-
gramming mode.
2. Press 1 CUP button to start espresso extraction. Press 1 CUP again once desired
volume of espresso has been extracted. The machine will beep twice to indicate the new
1 CUP volume has been set.

PROGRAMMING DOUBLE ESPRESSO

1. To begin programming, press the PROGRAM button once. The machine will beep
once and the program button will begin to flash. This indicates the machine is in pro-
gramming mode.
2. Press 2 CUP button to start espresso extraction. Press 2 CUP again once desired
volume of espresso has been extracted. The machine will beep twice to indicate the new
2 CUP volume has been set.

RESETTING DEFAULT VOLUMES

To reset the machine to the default 1 CUP and 2 CUP shot volumes, press and hold the
PROGRAM button until the machine beeps three times. Release the PROGRAM button.
The machine will return to its original default setting.
Note:
Default settings: 1 CUP shot volume is approx. 30ml. 2 CUP is approx. 60ml.
Press the 2 CUP button once. A preset volume of approx. 60mls will
be extracted. The machine will automatically stop once the preset
volume has been extracted.
Note:
Pressing the 1 CUP or 2 CUP buttons during a programmed
espresso will immediately stop the extraction.
65