Waeco MagicSafe MS660 Bedienungsanleitung Seite 88

MagicSafe MS660
Using MagicSafe
On vehicles with central locking, the doors and boot are locked when the
alarm system is activated. If the vehicle is equipped with an original conven-
ience function (e. g. electric windows or electric sunroof), these will also be
locked. You can control the convenience function separately using the
"COMFORT" button (see chapter "Using the convenience locking function"
on page 94).
If the alarm system is activated when a door, the bonnet or boot is open, the
status LED flashes every 3 sec. to indicate the problem.
If the door, bonnet or boot is closed within the next 15 sec., it will be
reintegrated into the alarm. If the door, bonnet or boot is closed after the
15 sec. have elapsed, it will not be monitored.
Activating the alarm system so that the vehicle can remain occupied
You can set the alarm system so that the alarm system does not trigger an
alarm when a movement is registered in the interior of the vehicle, e. g. to
leave a pet in the vehicle.
Proceed as follows:
➤ Press the "Lock" button twice in a row within 30 sec.
✓ The hazard lights flash once.
Reactivating the alarm system automatically
You can set MagicSafe so that the alarm system is reactivated automatically
(software function 7 "Self-activation", factory setting: deactivated) if the vehi-
cle is not used within 30 sec. of deactivating the alarm system (opening a
door or switching on the ignition). The indicator flashes twice to indicate this.
The central locking remains unaffected. If you wish the doors to be locked by
central locking self-activation, activate software function 10 "Locking the cen-
tral locking during self-activation" (factory setting: deactivated).
10.3 Deactivating MagicSafe
To deactivate the alarm system manually, proceed as follows:
➤ Press the "Unlock" button on the hand-held transmitter for approx. 1 sec.
✓ The hazard lights flash once.
✓ If the alarm system is connected to the central locking, all doors and
covers are unlocked.
88