Waeco MagicSafe MS660 Bedienungsanleitung Seite 65

MagicSafe MS660
5.2 Hand-held transmitter control elements
Hand transmitters have the following control elements:
fig. 5, page 3
1
2
3
4
5.3 MagicSafe operating modes
The alarm system has the following five operating modes:
Stand-by
The alarm system is kept in stand-by as soon as it is installed and correct-
ly connected. However, it does not trigger the alarm when in stand-by.
Activation time
The alarm system has an activation time of approx. 30 seconds.
The status LED on the key holder lights up as an visual indicator of the
activation time.
Armed
If the alarm system is activated, it can trigger the alarm. This happens if
someone e. g. breaks the door open, opens the bonnet or enters the
vehicle interior. If you wish to drive off, you must first deactivate the alarm
system. The system is then in stand-by mode.
The status LED on the key holder lights up as an visual activation
indicator.
Alarm triggered
When an alarm has been triggered, this is indicated by visual and acoustic
signals.
Designation
"Lock" button
"COMFORT" button
"Unlock" button
LED indicator (blue)
Technical description
Function
Activates the alarm system
Activates the convenience output
Deactivates the alarm system
65