Waeco MagicSafe MS660 Bedienungsanleitung Seite 82

Programming MagicSafe
No. Software function
16 Door contact/boot input
18 Car Finder/convenience func-
tion on
19 Switch time for convenience
locking function
20 Deactivation of faulty door con-
tacts
24 Visual signals
9.2 Description of the software functions
Function 1 (Siren sound – confirmation tone when activating and
deactivating)
This function enables a siren confirmation tone when the alarm system is
activated and deactivated.
NOTE
I
By activating the acoustic confirmation tone, the alarm system no
longer conforms to regulation 95/56/EC.
The operating approval for your vehicle expires within the scope of
validity of this directive!
Function 2 (Voltage drop sensor)
This function allows the voltage drop sensor to be activated or deactivated.
The sensor reacts to a vehicle battery load of at least 12 watts and triggers
an alarm.
Function 3 (Signal duration of the door locking contacts)
In some vehicles, (for example Mercedes-Benz), an activation time of
0.7 sec. might not be sufficient to completely activate the central locking
system. In such cases, you need to set the control time to 3 sec. using this
software function.
82
"Lock" button
Switch open when
the door is open
(12 volts)
Car Finder
25 sec. (auto)
On
Hazard light
MagicSafe MS660
"Unlock" button
Switch closed
when the door is
open (0 volts)
Convenience out-
put on
(➔ no. 8)
Manual
(➔ no. 4)
Off
Indicator