Setting The Time, Date And Weekday Display; Selecting The Time Format; Selecting The Date Format - Auerswald COMfortel 500 Bedienungsanleitung

Setting the Time, Date and Weekday
Display
You can adjust the time and date shown on
the display. If you do not want to have the
weekday shown on the display, you can
disable this setting.
Time
Note: If the date (only day and month)
and time are transferred over your
connection as a part of the CLIP
information associated with a call, this
time is automatically accepted by the
telephone. For more information about
the settings required to operate the
telephone on an Auerswald PBX, see
Page 24.
1.
Press the Menu key.
2.
Use the arrow keys
SET TIME menu.
3.
Press the OK key
The hour shown on the top left of the
display is blinking.
4.
Enter the current hour.
Enter two digits.
Press keys 0...9 for digits 0...9.
Note: You can skip digits that do not
need to be changed by pressing the
OK key .
Now the minute display is blinking.
5.
Repeat step 4 for minutes, month, day
and year.
Note: The currently set year is used to
calculate the weekday.
Date
Weekday
to scroll to the
.
The number
(for example, 5 for Friday) is blinking.
6.
If you would like to disable the display
of the weekday, press one of the arrow
keys .
This deletes the number of the
weekday.
7.
Press the Exit key.

Selecting the Time Format

You can show the time on the display in a
12 or 24-hour format.
1.
Press the Menu key.
2.
Use the arrow keys
HOUR FORMAT menu.
3.
Press the OK key
The currently set time format is now
displayed.
4.
Use the arrow keys
time format you want.
5.
Press the OK key

Selecting the Date Format

You can set the display to show the date in
a day/month format (DD-MM) or a month/
day format (MM-DD).
1.
Press the Menu key.
2.
Use the arrow keys
DATE FORMAT menu.
3.
Press the OK key
The currently set date format is now
displayed.
4.
Use the arrow keys
date format you want.
5.
Press the OK key
of the weekday
to scroll to the
.
to scroll to the
.
to scroll to the
.
to scroll to the
.
27