Adjusting The Contrast; Selecting The Dialling Type; Setting The Flash Time; Setting Area&Lds - Auerswald COMfortel 500 Bedienungsanleitung

Adjusting the Contrast

The display contrast can be adjusted in
eight levels.
1.
Press the Menu key.
2.
Use the arrow keys
LCD CONTRAST menu.
3.
Press the OK key
The current display contrast is shown.
4.
Use the arrow keys
display contrast you want.
5.
Press the OK key

Selecting the Dialling Type

The telephone supports dual-tone multi-
frequency (DTMF/tone dialing) and pulse
dialling (PD). Only activate pulse dialling if
the connection on which you operate the
telephone does not support DTMF/tone
dialling.
1.
Press the Menu key.
2.
Use the arrow keys
DIAL MODE menu.
3.
Press the OK key
The currently set dialling type is now
displayed.
4.
Use the arrow keys
dialling type you want.
5.
Press the OK key

Setting the Flash Time

The telephone supports four different Flash
times: 100 ms, 120 ms, 300 ms and
600 ms. Configure
according to the connection on which you
operate the telephone.
1.
Press the Menu key.
2.
Use the arrow keys
SET FLASH menu.
28
to scroll to the
.
to scroll to the
.
to scroll to the
.
to scroll to the
.
the Flash time
to scroll to the
3.
Press the OK key
The currently set Flash time is
displayed.
4.
Use the arrow keys
Flash time you want.
5.
Press the OK key
Setting Area&LDS
You can only configure this setting after
selecting either the language "English" or
"Polski." See Page
Telephone numbers are displayed in the
caller list with the city code (area code). For
calls made out of the country, the country
prefix (LDS code) is also displayed. In order
to omit having to enter the city code when
dialling telephone numbers directly over
the caller list, enter your city code and the
country prefix here.
1.
Press the Menu key.
2.
Use the arrow keys
SET AREA&LDS menu.
3.
Press the OK key
The currently
displayed.
4.
Enter the area code.
Enter a maximum of 4 digits.
Press keys 0...9 for digits 0...9.
Note: When entering fewer than 4
digits, press the OK key
entering the digits.
The currently
displayed.
5.
Enter the LDS code.
Enter a maximum of 2 digits.
Press keys 0...9 for digits 0...9.
6.
Press the OK key
.
to scroll to the
.
26.
to scroll to the
.
set area code
set LDS code
.
is
after
is