Ceag CG-S / IP-Router + 1P Betriebsanleitung Seite 38

1. Open the command prompt by clicking with the right mouse button on the start menu and select the option „run
as administrator" .
3
2. First enter the command ipconfig to call up the current IP address of your computer.
3. Enter the command route add 192.168.1.250 mask 255.255.255.255 xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is
the current IP address of your PC)
Then enter the IP address 192.168.1.250 into the address bar of your web browser to call up the web interface for
configuring the router.
Figure: Web interface of the CG-S / IP Router+ 1P
Further information about status polling and configuration in chapter 4.
3 Alternatively you can click on Windows Start, enter ‚cmd' into the search field and press Shift+Ctrl+Enter to start the command
prompt as an administrator.
4 route add 192.168.1.0 mask 255.255.255.0 xxx.xxx.xxx.xxx can also be used.
38
.
4