Flash Bracketing Series (Fb) - Metz MECABLITZ 58 AF-2 Canon Bedienungsanleitung

Setting procedure:
• Press the
Select
ars on the display.
Beep
• Use the
Remote
menu. The selected menu item will be highlighted
Set
against a dark background.
• Press the
selection.
ON
• Choose the setting desired using the
keys. The setting takes effect immediately.
Set
• Press repeatedly to return the display to its normal reading. If the key
not pressed, the display will switch back to normal automatically after approxi-
mately 5 seconds.
M F 4.0
MZoom 24
10 m ISO 200
button repeatedly until „Select" appe-
Sel
and keys to select „BEEP" from the
key to confirm the special function
Set
and
When the beep function is turned on,
the symbol is also displayed on
the LC display.

7.3 Flash Bracketing Series (FB)

A series of flash exposures (flash-bracketing FB) can be carried out in the
TTL A
E and automatic flash modes. A flash bracketing series consists
of three successive flash shots with different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the
display. The possible correction values range from 1/3 to 3 apertures in one-
third aperture increments.
Setting procedure:
• Press the button repeatedly until „Select"
Sel
appears on the display.
• Select the menu option „FB" by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
Set
• Select the desired setting with the
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is reset to its normal view. If the
button is not pressed, the display is automatically reset to its normal view
after about 5 seconds.
TTL
Remote
Select
FB
Standby
Set
FB
1 1 /
3
and
Set
,
127