Cordless Remote Mode (Remote) - Metz MECABLITZ 58 AF-2 Canon Bedienungsanleitung

Setting procedure:
• Press the
Zoom Ext
Select
appears on the display.
Zoom Size
m/ft
• Select the menu option „ZoomSize" by pressing the
Set
and
be highlighted.
• Confirm the selection of the special function by pres-
sing the
Size ON
• Select the desired setting with the
keys. The setting takes effect immediately.
Set
• Press the button
reset to its normal view. If the button
sed, the display is automatically reset to its normal
view after about 5 seconds.
F 5.0
TTL
SZoom 35
SZoom
12 m
Refer to your camera's instruction manual for further information.
The Zoom size function cannot be set with cameras which do not support
shooting format adjustment!
130
button repeatedly until „Select"
Sel
keys. The selected menu option will
button.
Set
and
repeatedly until the screen is
is not pres-
Once the Zoom Size mode is activated,
„SZoom" will appear on the display next to
the focal length.

7.7 Cordless remote mode (Remote)

• When „Remote OFF" appears, the cordless remote mode is deactivated.
• When „Remote Master" appears, the flash unit is operating as a guiding
master flash unit on the camera.
• When „Remote Slave" appears, the flash unit is operating completely as a sla-
ve flash unit. See also Section 19.
Setting procedure:
• Press the button repeatedly until „Select" appe-
Sel
ars on the display.
• Select the „Remote" menu option by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
Set
• Select the desired setting with the
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button
sed, the display is automatically reset to its normal
view after about 5 seconds.
BEEP
Select
Remote
FB
Set
Remote
Master
and
Set
CH1
M
is not pres- A TTL
AZoom 28
1
B TTL+ /
F32
3
Para Sel