Troubleshooting; Technical Data; Disposal - Cleanmaxx Z 09668 Gebrauchsanleitung

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does
not work.
The performance
is weak.
Dust escapes from
the device during
cleaning.
During vacuum
cleaning, an un-
pleasant smell is
detected.

Technical Data

Article number:
Model:
Voltage supply:
Power:
Protection class:

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices.
You can obtain more information from your local authorities.
09668_de-gb-fr-nl_V1.indb 23 09668_de-gb-fr-nl_V1.indb 23
23
Possible cause/solution/tips
• Is the plug not inserted in the mains socket correctly? Insert
the plug correctly.
• Is the socket defective? Try another socket.
• Check the fuse of your mains connection.
• Is the dust container too full? Empty the container.
• Are the fi lters heavily clogged? Clean them.
• Are the nozzles or the telescopic tube blocked? Remove the
blockage.
• Is the dust container too full? Empty the dust container.
• Are the fi lters not inserted correctly? Check them to make
sure they fi t in place properly.
• Is the device being used for the fi rst time? A smell often de-
velops when new devices are fi rst used. The smell should
disappear after you have used the device several times.
Z 09668
XL-602-40
220 – 240 V ~ 50/60 Hz
400 W
II
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The
cost varies depending on the
service provider.)
All rights reserved.
EN
08.09.2015 16:28:59 08.09.2015 16:28:59