Troubleshooting - Cleanmaxx Y8291BL Gebrauchsanleitung

4. Empty the collecting container over a dustbin.
5. Tap out the dust fi lter over a dustbin. Brush off with a soft brush if necessary.
6. Clean the collecting container and the fi lter holder with clear, lukewarm water if
necessary.
7. Allow all parts to dry completely before reassembling them. Only ever dry them in
the air, and never use a hair dryer to do so.
Storage
• Store the device in a cool, dry place which is protected from direct sunlight and is out
of the reach of children and animals.
• For easy storage, hook the device with the handle (1) pointing downwards into the
wall bracket that is also supplied and place the nozzles into the storage area (12)
(Picture C).

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device works slowly
or doesn't start
The suction power is too
weak.
Dust escapes from the
device when vacuuming.
01463_Inlay_DE-EN-FR-NL_A5_V4.indb 19 01463_Inlay_DE-EN-FR-NL_A5_V4.indb 19
19
Possible cause
The battery is drained.
The battery is weak.
The collecting container (6)
is too full.
The dust fi lter (10) is dirty.
The suction opening (9) is
clogged.
Parts that are too big or
too heavy can snag on the
carpet.
Collecting container (6)
or dust fi lter (10) not fi tted
correctly.
The dust fi lter (10) is dirty.
Solution
Charge the battery.
Charge the battery.
Empty the collecting con-
tainer.
Clean the dust fi lter.
Switch the device off and
remove the clog.
Remove these objects by
hand.
Correct the position of the
collectin container and the
dust fi lter.
Clean the dust fi lter.
25.09.2020 14:43:28 25.09.2020 14:43:28
EN