Storage; Technical Data - Cleanmaxx Z 09666 Gebrauchsanleitung

5. Place the exhaust hatch in the device and close the hatch. The hatch must audibly
lock into place.
If the HEPA exhaust air fi lter is damaged or worn you can order a new fi lter at
www.service-shopping.de.
Cleaning the housing and nozzles
• If needed, clean the housing with a damp, soft cloth.
• Regularly remove hair and lint from the nozzles.
Please note the instructions in the section "Cleaning the turbo nozzle" when cleaning
the turbo nozzle.
Cleaning the turbo nozzle

Storage

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Protection class:
09666_de-en-fr-nl_V1.indb 27 09666_de-en-fr-nl_V1.indb 27
27
1. If hair or fl uff becomes caught in the cogs of the turbo
nozzle open the cog cover on the base of the nozzle.
2. Pull out any hair or dirt caught in the cogs.
3. Close the cog cover again.
• For storage you hook the fl oor nozzle into the holder on
the back of the device (see fi gure) and close down the
telescopic tube as far as it will go.
• Store the vacuum cleaner in a cool dry indoor room where
it cannot be reached by children or animals.
Z 09666
CP-CY4503ES-2
220 – 240 V~, 50 / 60 Hz
1400 W
II
Customer
Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The cost
varies depending on the service
provider.)
EN
28.08.2015 14:07:54 28.08.2015 14:07:54