Device Cleaning; Emptying The Dust Container - Cleanmaxx Cycloon Power Pro Gebrauchsanleitung

Device Cleaning

CAUTION!
❐ Pull the mains plug out of the socket before you empty the dust container or clean the
fi lters.
❐ Empty the dust container regularly. The dust container must be emptied at the latest
when the dust in the dust container has reached the MAX mark.
❐ The fi lters must be cleaned regularly in order to prevent overloading of the motor.
❐ Under no circumstances should you clean the HEPA fi lter with water! You should only
ever use a brush or a dry cloth.
❐ The dust container and all fi lters must be completely dry before you insert them again
and use or store away the device.
❐ Do not use any corrosive or abrasive cleaning agents to clean the vacuum cleaner hous-
ing. These could damage the surface.

Emptying the Dust Container

1. Hold down the release button on the handle of the dust
container and detach the dust container from the vacuum
cleaner.
2. Hold the dust container over a dustbin and press the release
button to open the bottom fl ap of the dust container.
3. Carefully tap out the dust container.
4. Then close the bottom fl ap of the dust container. It must
engage audibly.
30