Connecting The Suction Hose To The Telescopic Tube; Placing The Nozzle Onto The Telescopic Tube - Cleanmaxx Cycloon Power Pro Gebrauchsanleitung

Connecting the Suction Hose to the Telescopic Tube

Placing the Nozzle onto the Telescopic Tube

CAUTION!
❐ Always switch off the vacuum cleaner fi rst before changing the nozzles.
The nozzles can be attached either to the telescopic tube or directly to the handle.
Select a nozzle attachment and plug it onto the end of the telescopic tube with the narrower
diameter. To change the nozzle attachment, pull off the nozzle attachment and plug a new
nozzle attachment onto the telescopic tube. The following nozzle attachments are available
to you:
1. Slide the end of the suction hose with the exhaust air valve
onto the end of the telescopic tube with the wider diameter.
2. To remove the suction hose from the telescopic tube, simply
pull off the suction hose.
The combi fl oor nozzle is suitable for both carpets and hard
fl oors.
The foot switch allows you to change between carpet and
hard fl oor. A brush and a rubber lip are extended on the
underside of the nozzle for use on hard fl oors.
The upholstery nozzle is suitable for cleaning all kinds of
upholstery, e. g. sofas, car seats etc.
• The crevice nozzle is suitable for upholstery, cleaning the
inside of cars and for all nooks and crannies that cannot be
reached with the other nozzles.
• The brush nozzle is suitable for all uneven objects, furni-
ture, lamps, profi les and skirting boards, window ledges,
etc.
There is an arrow mark on the crevice nozzle.
To turn the crevice nozzle into a brush nozzle,
all you have to do is fold the end of the crevice
nozzle in the direction marked by the arrow.
27