Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Device; Emptying And Cleaning The Dust Container - Cleanmaxx Z 08925 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning the Device

CAUTION!
❐ Empty the dust container frequently. Ideally, empty the dust container after every use
or when the MAX mark is reached at the latest.
❐ Clean the fi lter regularly to prevent overheating of the motor.
❐ Remove the mains plug from the plug socket before doing any cleaning of the device.
❐ Keep the device, the cable and the mains plug away from water or other liquids in order
to avoid electric shocks. Make sure that no liquid gets into the device during cleaning.
Only the the dust bin, the plastic dust fi lter and the exhaust air fi lter may be cleaned with
water. However, they must be completely dry before they are put back into the device.
❐ Never clean the dust fi lter in the dust container lid using water or other liquids!
❐ The fi lters are neither machine-washable, dishwasher-safe nor suitable for tumble
drying! Only ever dry the fi lters in the air, and never use a hair dryer to do so.
❐ Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the
device. These could damage the surfaces.
Clean the dust fi lter, the plastic dust fi lter and the exhaust air fi lter regularly, or if you
notice a reduction in the suction power.
Clean the housing if necessary using a damp, soft cloth. Dry it with a soft cloth.
Remove hair and fl uff from the nozzles at regular intervals.
The fi lters may lose some of their colour over time. This is normal and does not
have any adverse effect on function.

Emptying and cleaning the dust container

08925_DE-GB-FR-NL_V0.indb 27
08925_DE-GB-FR-NL_V0.indb 27
1. Push the release button on the dust container and pull it
out of the device by the handle.
2. Hold the dust container over an open garbage bin. The
dust container should be as close as possible to the
garbage bin so that dust from the dust container only
falls into the garbage bin and is not dispersed in the
surrounding area.
3. Unlock the release button to open the dust container. The
bottom of the dust container will open and the dirt will fall out.
4. Shut the bottom of the dust container again. The fastener
must audibly lock into place.
27
26.05.2014 09:20:36
26.05.2014 09:20:36

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis