Sun Microsystems Fire T2000 Systemverwaltungshandbuch Seite 79

2. Wählen Sie den Festplattennamen aus, der das von Ihnen konfigurierte RAID-
Volume bezeichnet.
In diesem Beispiel lautet der logische Name des Volumes c0t2d0.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c0t2d0 <SUN72G cyl 14084 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@2,0
Specify disk (enter its number): 2
selecting c0t2d0
[disk formatted]
FORMAT MENU:
disk
type
partition
current
format
fdisk
repair
label
analyze
defect
backup
verify
save
inquiry
volname
!<cmd>
quit
- select a disk
- select (define) a disk type
- select (define) a partition table
- describe the current disk
- format and analyze the disk
- run the fdisk program
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- set 8-character volume name
- execute <cmd>, then return
Kapitel 3 Verwalten von Festplattenvolumes 63