MADRIX PLEXUS Handbuch Seite 96

96 MADRIX PLEXUS User Manual / Handbuch
Further Settings To Manage
Buttons
Scans the USB ports of your computer and the network (Ethernet) for
connected PLEXUS devices. If devices are found, they will be shown in the list.
This symbol shows that the device is connected via USB.
This symbol shows that the device is connected via network (Ethernet).
Re-scans already connected devices and brings the information in the list up to
date.
Enables remote access to your device (network connection required). For more
information, see Remote Control
Synchronizes the internal clock of the PLEXUS with the clock of your computer.
The computer clock will define the time and date that is used. First, select your PLEXUS devices in
the list. Then, press 'Sync Time'.
Upgrades the firmware of your MADRIX PLEXUS (USB connection required). For
further instructions, see
Downloads a saved PLEXUS Configuration directly from a connected PLEXUS to
your harddisk. You can use this feature to create backups, for example.
.
103
MADRIX PLEXUS (Firmware) .
106
© 2011 inoage GmbH